Description
Fast installation connector also be called Field install connector
is a new kind of connector that could be used in FTTH project
scene. They don’t need to polishing, no epoxy. They could be
installed in the field and make connection less than two minutes.
Of course, It don’t need fused the fiber. Just some little tools
enough, so it could save time and cost.
The Field Assembly Connector products have been factory-polished,
eliminating the need for any polishing materials, thereby enabling
the preparation and termination of optical fibers in a fraction of
the time of other conventional methods. The connector also uses
Ceramic V-groove mechanical splice principals and therefore the use
of an epoxy is not required for the termination of the connector.
This Fast Connector offers convenience in assembling and strong
stability. It allows simple optical core connection without any
additional practices, or adhesives. It does not require a working
space by connecting itself in the challenging environments such as
a telephone pole and a manhole. It reconnects the cables and
reduces the connection defect rate by an installer error in the
field.
Assembly of the SC type quick connector requires only normal fiber
preparation tools: a fiber stripping tool, wipes and a fiber
cleaver. No electrical power supply is needed. Just Strip the
buffer, cleave and clean the fiber and then insert the fiber into
the Fast Connector. Installation takes just minutes and couldn't be
easier.
The Field Assembly Connector series are already a popular solution
for optical wiring inside buildings and floors for LAN & CCTV
applications and with the expansion of FTTH, is already proving
itself to be the connector of choice by incumbents, municipalities,
utilities & alternative carriers. Our Field Assembly Optical
Connector series are now available in SC, LC, or FC variants,
catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode
and multimode fiber types, including Multi-mode 62.5/125um and
Multi-mode 50/125um. The single-mode versions are available with
SPC or APC ferrules.
Optical Specifications
| Part No. | J-O-SSA-53 | Connector | SC APC |
| Ferrule | Ceramic | V-Groove | Ceramic material |
| Cable Diameters | 0.9/2.0/3.0mm Simplex cable 2x3 FTTH Drop Cable | Dimension | 53mm |
| Insertion Loss | ≤0.3dB(typical);≤0.5dB(Max) | Return Loss | UPC≥40dB;APC≥50dB |
| Tension Strength | ≥50N | Operating Temperature | -40°C~+75°C |
End face appearance
| End face appearance tested by 200 times magnifying glass |
| Test area | Standard |
| area | area coverage | scratch | spot | shine spot/
white spot | crack |
| 1 | Ф25μm within | not allowed | not allowed | no allowed | not allowed |
| 2 | Ф25μm~ Ф125μm | widh≤5 μm qty≤
3pcs_ | Diam≤5μm
qty≤3pcs. | not allowed | not allowed |
| 3 | Ф125μm~Ф130μm (glue gap) | width≤2μm, lengh≤60μm |
| 4 | end face of ceramic( Ф130μm~ Ф250μm) | width≤10μm
qty≤5pcs. | Diam≤10μm
qty≤5pcs. | Diam≤10μm
qty≤5pcs. | not allowed |
Application in FTTX:
• Fiber optic communication system and telecommunication networks
• Fiber optic data transmission
• CATV
• Optical access network
• Fiber to the Subscriber (FTTX) applications
• Optical cable interconnection
• Maintenance or emergency restoration of fiber networks
• Repair and replacement requirements
• Fiber optic equipment
